Hallo Josef,
ich habe mal so ein .NetComControl gemacht wie du es gezeigt hast, allerdings habe ich
einen komischen Effekt:
Direkt nach dem Einfügen des Controls in das Form sieht es aus wie im Bild NetComControl_A1.png.
Schließe ich das Form oder schließe ich Access und öffne dann das Form erneut, sieht es
aus wie im Bild NetComControl_A2.png.
Wechsel ich dann im Form kurz in die Entwurfsansicht und wieder zurück, dann ist die
Darstellung wieder wie im Bild NetComControl_A1.png.
Hast du diesen Effekt auch?
PS: Verwendet habe ich .NET 4
Gruß Sten
- Bild NetComControl_A1.png
- NetComControl_A1.png (6.01 KiB) 9844-mal betrachtet
- Bild NetComControl_A2.png
- NetComControl_A2.png (6.03 KiB) 9844-mal betrachtet